-- ENGLISH -- VAGON DRILL ( VDD3-VDD5-ROCKER 34 ) AND SONDAJ MACHINE
TEKSOMAK VDD5 VAGONDRILL
VDD5 vagon drill is designed for drilling blast holes with DTH. With three wheel traction system, strong construction, easy maneuver capability VDD5 is very useful machine in heavy conditions of the field traction.
** Price: € 24,000 + KDV
> Three-wheel drive with a march from the system
> Easy to move and place
> Simple control panel
> Reinforced body structure
> Cradle forward shift system
> Quality materials selection
> Four-point reduction on the ground shaking bass with the piston
TEKSOMAK VDD5 VAGONDRILL
TECHNICAL SPECIFICATIONS --------------- ---------------
General Information
Engine 34.4 HP
Weight 2180 kg
3 wheel drive traction system
Cradle Information
Height 5.00 m
Stroke 4.10 m
Printing Force 0 - 25,000 N
Tensile Force 50,000 N
Hole Information
Drilling Speed 0 - 120 cm / min (varies by floor)
Drilling diameter 63 mm - 102 mm / 2.5''- 4.0''
Drilling depth 16 m
Trepan Engine
Speed 75 device / min
Torque 1000 Nm
TEKSOMAK VDD3 VAGONDRILL
VDD3 is designed for drilling blast holes by using DTH. VDD3 is easy to use, easy to maneuver and economic driller. VDD3's low fuel consumption and strong chasse satisfies its customer
** Price: € 18,000 + KDV
TEKSOMAK VDD3 VAGONDRILL
- TECHNICAL SPECIFICATIONS --
General Information
Motor 16Hp
Weight 1900 kg
One wheel drive traction system
Cradle Information
Height 5.00 m
Stroke 4.10 m
Printing Force 0 - 25,000 N
Tensile Force 50,000 N
Hole Information
Drilling Speed 0 - 120 cm / min (varies by floor)
Drilling diameter 63 mm - 102 mm / 2.5''- 4.0''
Drilling depth 16 m
Trepan Engine
Speed 75 device / min
Torque 1000 Nm
TEKSOMAK ROCKER 34
Rocker-34 is designed for drilling blast holes with DTH. With hdrolic crawler traction system, strong construction, easy maneuver capability Rocker-34 is very useful machine in heavy conditions of the field.
** Price: € 40.000 + KDV
TEKSOMAK ROCKER 34
- TECHNICAL SPECIFICATIONS --
Motor 64 HP
Weight 2900 kg
Hydraulic motor traction system palette
Cradle Information
Height 5.00 m
Stroke 4.10 m
Printing Force 0 - 25,000 N
Tensile Force 50,000 N
Hole Information
Drilling Speed 0 - 120 cm / min (varies by floor)
Drilling diameter 63 mm - 102 mm / 2.5''- 4.0''
Drilling Depth: 50 m
Trepan Engine
Speed 75 device / min
Torque 1000 Nm
MDE 4 SONDAJ MACHINE (MACHINE MARBLE SONDAJ)
Area within blocks of the marble to be removed should be cut with diamond wire.
This diamond drill holes for the wires to move the marble to drop layers. 3 by this process (one vertical, two horizontal) drilling is done by opening holes and the holes in this regard to meet each other (do not drill holes deviation) is required.
2''(inches) ve3''(inches) in diameter drilling capacity, horizontal and vertical drill holes that are in the drift, hydraulic rotation and the bottom hole drilling machine with a pneumatic gun drilling
** Price: 10.000 € + KDV
(1 (one) of 10 meters of drilling pipe, and 1 local gun bit, is included in the price.)
4 MARBLE MDE Drilling Machine
- TECHNICAL SPECIFICATIONS --
Motor power: 11 kW
Drilling Diameter: 92 mm / 76 mm
Drilling Height: max.20 m (varies by floor)
Progress Rate: max.20 cm / min
Weight: 155 kg (excluding power unit)
Oil Tank: 50 lt
Air Consumption: 3.5 m3/dk, max 10bar, 2m3/de max 10 bar
Hydraulic System: Double-pump combined, the pace can be set.
Drilling System: Rotation of the bottom hole hidrolik.delme gun pneumatic gun.
CONTACT:
Ali KAYRA
ali.kayra@keywana.com
+90543 710 34 82
Kıvanç KAYRA
kivanc.kayra@keywana.com
+90505 348 66 33
phone : +90312 479 44 64
faks: +90312 479 44 64
sokullu mehmet paşa mahallesi
6.sokak no:8/3 öveçler /ankara